Wind turbines are very costly and buying them defeats the purpose of using wind energy. You are harnessing wind power and as such, you will use a residential windmill but buying ready-made ones will just cost you so much that it is like not benefiting from it at all. Although many advertisers claim that this is a good investment, a better investment is to spend lesser for a wind turbine that will give you the same power or energy boost; this can only be done by making wind turbines yourself.
The first step in making a residential windmill is to pick the type of wood that will withstand great wind flow. From a common standpoint or perspective, the ideal length of wood is just one meter. Once the length is decided upon, make sure you have three pieces of equal size. These will be your windmill blades. Horizontally divide each blade into five equal sizes using a pencil or a marker. One end should be marked as the baseline and the other as the tip. There should also be a difference in the markings for the front and back.
Trace a line and halfway from the tip, the fourth square should be marked down to the base. This marking will show you a diagonal line which will help you cut accurately. Once done, the blade should now look like a saw. With the wood facing up, look for the tip of the fourth section and mark it with a number 7. Saw it and smoothen the wood.
The residential windmill blades should have a 120 degree angle. Cut the three blades at this angle from the bottom and this will give you the right corners to connect the three of them. Once your residential windmill blades are ready, all you need to do is to post them on the stand and connect the entire device onto your battery.
Autor: Robert K.
Now Pay Close Attention Here - Are you seriously looking for a proven way to save money on your electricity bills? There is a Guide which will help you to Build wind power at home. You will be surprised to know that how easy it is to Build a Windmill at Home, that will not only save your money but you will help in cleaning the environment. Check the Guide
Added: July 26, 2009